路沿石钢模具弹簧等弹性零件在使用过程中弹簧最易损坏,通常出现断裂和变形现象。采取的办法就是更换,在更换过程中一定要注意弹簧的规格和型号,弹簧的规格和型号通过颜色、外径和长度三项来确认,只有在三项都相同的情况下才可以更换。
Springs of elastic parts such as stone steel die springs along the road are most vulnerable to damage in the course of use, and usually appear fracture and deformation. Replacement is the way to take. In the process of replacement, we must pay attention to the specifications and models of springs. The specifications and models of springs are confirmed by three items: color, outer diameter and length. Only when the three items are the same, can they be replaced.
路沿石钢模具紧固零件,检查紧固零件是否松动、损坏现象,采取的办法是找相同规格的零件进行更换。路沿石钢模具在使用过程中冲头易出现折断、弯曲和啃坏的现象,冲套一般都是啃坏的。冲头和冲套的损坏一般都用相同规格的零件进行更换。冲头的参数主要有工作部分尺寸、安装部分尺,长时间使用后必须磨刃口,研磨后刃口面必须进行退磁,不能带有磁性,否则易发生堵料。

Stone steel die fastening parts along the road, check whether the fastening parts are loose and damaged, the method adopted is to find the same specifications of parts for replacement. The punch of the stone steel die along the road is easy to break, bend and gnaw during its use, and the punch www.jiaodaijiqi.cnwww.yanglaoyuann.cnwww.sjzbaojie.net.cnwww.wufengwantou.cnwww.wushui

chulii.com.cnwww.wushuichul.com.cnsleeve is generally gnawed. The damage of punch and punch sleeve is usually replaced by parts of the same specification. The main parameters of the punch are the size of the working part and the length of the installation part. The edge must be grinded after a long time of use. The edge surface must be demagnetized after grinding. It can't be magnetic, otherwise it is easy to plug.